SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013SANTA FE XL PREMIUMREPAIR AND DIAGNOSISENGINE PERFORMANCETESTING & DIAGNOSISENGINE CONTROL SYSTEM DIAGNOSIS (3 OF 3)DTC P2610: ECM/PCM-ENGINE OFF TIMER PERFORMANCEDTC INFORMATIONDTC DETECTING CONDITION
2013 Hyundai Santa Fe XL Premium

DTC Information: DTC Detecting Condition

2013 Hyundai Santa Fe XL PremiumSECTION DTC Detecting Condition
Item Detecting Condition Possible cause
DTC Strategy Case1
  • Compares the time elapsed recorded by the Low Power Counter (LPC) against that recorded by the test timer
  1. PCM
  2. Poor Battery Condition
  3. Connecting condition
Case2
  • Checks for abnormal resets of the LPC
Enable Conditions Case1
  • Engine running longer than 10sec.
  • Battery voltage greater than 8V
Case2
  • No Memory Failure Occurred
Threshold value Case1
  • The difference between the counter the LPC and the calibration the test timer clocks up longer than 20sec.
Case2
  • The LPC is reset to zero abnormally
Diagnosis Time
  • -
MIL On Condition
  • 2 Drive Cycles
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.