Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013SANTA FE XL PREMIUMREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESCLUSTER MODULE DIAGNOSISDTC INDEX
2013 Hyundai Santa Fe XL Premium
DTC Index
2013 Hyundai Santa Fe XL PremiumSECTION DTC Index
DTC INDEX
| DTC | Description |
|---|---|
| DTC B100051 | EOL Not Programmed |
| DTC B100252 | EPB Missing Error |
| DTC B100255 | EPB Present Error |
| DTC B100352 | ABS Missing Error - without ABS unit or connector fault |
| DTC B100355 | ABS Present Error - Coding code error |
| DTC B100552 | Airbag Missing Error - without Airbag unit or connector fault |
| DTC B100555 | Airbag Present Error - Coding code error |
| DTC B100752 | AFLS Missing Error - without AFLS unit or connector fault |
| DTC B100755 | AFLS Present Error - Coding code error |
| DTC B100852 | MDPS Missing Error |
| DTC B100855 | MDPS Present Error |
| DTC B100952 | 4WD Missing Error - without 4WD unit or connector fault |
| DTC B100955 | 4WD Present Error - Coding code error |
| DTC B101052 | ESC Missing Error |
| DTC B101055 | ESC Present Error |
| DTC B102052 | TPMS Missing Error |
| DTC B102055 | TPMS Present Error |
| DTC B104052 | LKAS/LDWS Missing Error - without LKAS/LDWS unit or connector fault |
| DTC B104055 | LKAS/LDWS Present Error - Coding code error |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.