Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHYUNDAI2013SANTA FE XL PREMIUMREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESCLUSTER MODULE DIAGNOSISDTC B1000-51: EOL NOT PROGRAMMEDDTC INFORMATIONDTC DETECTING CONDITION

2013 Hyundai Santa Fe XL Premium

DTC Information: DTC Detecting Condition

2013 Hyundai Santa Fe XL PremiumSECTION DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Check CAN communication	Check option information and performance of cluster Perform cluster coding procedure Check SCC/EPB/ABS/Airbag/AFLS/MDPS/4WD/ESC/TPMS/LDWS/ECS Check CAN line Check Cluster
Enable Conditions		IG key "ON"
Case 1	Threshold Value	Not performed cluster coding
Case 1	DTC Erasing Time	Performed correct coding procedure
Case 2	Threshold Value	Failed initial coding performance
Case 2	DTC Erasing Time	Erased DTC after solved problem
Diagnostic Time		2, 000ms

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.