Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013GENESIS COUPE 2.0T R-SPECREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROL SYSTEM (DTC TROUBLESHOOTING) (1 OF 3) - 2.0LDTC P0125: INSUFFICIENT COOLANT TEMPERATURE FOR CLOSED LOOP FUEL CONTROLSPECIFICATION
2013 Hyundai Genesis Coupe 2.0T R-Spec
DTC P0125: Insufficient Coolant Temperature For Closed Loop Fuel Control: Specification
2013 Hyundai Genesis Coupe 2.0T R-SpecSECTION Specification
[ECTS]
TEMPERATURE AND RESISTANCE CHART
| Temp. (°C) | Resistance (kΩ) | Temp. (°C) | Resistance (kΩ) |
|---|---|---|---|
| -20 | 14.1 ~ 16.8 | 40 | Approx. 1.2 |
| 0 | Approx. 5.8 | 60 | Approx. 0.6 |
| 20 | 2.3 ~ 2.6 | 80 | Approx. 0.3 |
[THERMOSTAT]
THERMOSTAT SPECIFICATIONS
| THERMOSTAT | Normal Parameter |
|---|---|
| Valve Opening Temp. | 80~84°C |
| Valve Closing Temp. | 77°C |
| Full Open Lift | Approx. 8mm (95°C) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.