Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013GENESIS COUPE 2.0T R-SPECREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMEXTERIOR BODY PANELSFENDERREPAIR PROCEDURESREPLACEMENT
2013 Hyundai Genesis Coupe 2.0T R-Spec
Repair procedures: Replacement
2013 Hyundai Genesis Coupe 2.0T R-SpecSECTION Replacement
NOTE:
- Be careful not to damage the hood and body.
- When removing the clips, use a clip remover.
- Remove the front bumper. (Refer to "FRONT BUMPER ")
- Remove the head lamps. (Refer to "HEAD LAMPS ")
- Remove the side sill molding (A).
- Loosen the wheel guard mounting screws.
- Remove the front bumper mounting screw (A).
- After loosening the fender mounting bolts, remove the fender (A).
- Installation is the reverse of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.