Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013GENESIS COUPE 2.0T PREMIUMREPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESMECHANICAL - HYDRAULICGENERAL INFORMATION (BRAKE SYSTEM)SPECIFICATIONSBRAKE COMPONENT SPECIFICATIONS
2013 Hyundai Genesis Coupe 2.0T Premium
Brake Component Specifications
2013 Hyundai Genesis Coupe 2.0T PremiumSECTION Brake Component Specifications
BRAKE COMPONENT SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Master cylinder | Type | Tandem | |
| Cylinder I.D. | 23.81mm (0.94in) | ||
| Piston stroke | 43±1mm (1.69±0.039in) | ||
| Fluid level switch | Provided | ||
| Brake booster | Type | 7" + 8" Tandem | |
| Boosting ratio | 9: 1 | ||
| Front Disc brake | Caliper Type | General Disc Brake | Brembo Disc Brake |
| Type | Ventilated disc | Ventilated disc | |
| Disc O.D | 320mm (12.60in) | 340mm (13.39in) | |
| Disc thickness | 28mm (1.10in) | 28mm (1.10in) | |
| Caliper piston | Single | 4piston | |
| Cylinder I.D | ø60mm (2.36in) | ø (42mm+42mm (1.65in+1.65in)) X2 | |
| Rear Disc brake | Caliper Type | General Disc Brake | Brembo Disc Brake |
| Type | Solid disc | Ventilated disc | |
| Disc O.D | 314mm (12.36in) | 330mm (12.99in) | |
| Disc thickness | 13mm (0.51in) | 20mm (0.79in) | |
| Caliper piston | Single | 4piston | |
| Cylinder I.D | ø42.9mm (1.69in) | ø (32mm+28mm (1.26in+1.10in)) X2 | |
| Parking brake | Type | DIH (Drum in hat) | |
| Drum I.D. | ø 190mm (7.48in) | ||
|
NOTE:
O.D.: Outer Diameter
I.D: Inner Diameter |
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.