Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHYUNDAI2013EQUUS ULTIMATEREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLELECTRONIC STABILITY CONTROL DIAGNOSISDTC C1200: WHEEL SPEED SENSOR FRONT-LH OPEN SHORTGENERAL INFORMATIONDTC DETECTING CONDITION

2013 Hyundai Equus Ultimate

General Information: DTC Detecting Condition

2013 Hyundai Equus UltimateSECTION DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring the signal current	Poor connection Open or short of Wheel speed sensor circuit Faulty Wheel speed sensor
Threshold valve	When the measured sensor signal current is continuously out of the specified range (4.5 mA ± 10% ~ 20 mA ± 10%)
Fail-Safe	Only one wheel failure : The ABS/TCS/ESC functions are inhibited. The ABS/ESC warning lamps are activated, the EBD warning lamp is not activated. More than two wheels failure : The ABS/EBD/TCS/ESC functions are inhibited. The ABS/EBD/ESC warning lamps are activated.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.