SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2013EQUUS ULTIMATEREPAIR AND DIAGNOSISBODY & FRAMESEATSPOWER SEAT MODULE DIAGNOSISDTC B1602: CAN ERRORGENERAL INFORMATIONDTC DETECTING CONDITION
2013 Hyundai Equus Ultimate

General Information: DTC Detecting Condition

2013 Hyundai Equus UltimateSECTION DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN Communication Check
  1. IPM, PSM are not Sleep condition
    1. CAN High Line short to battery
    2. CAN Low Line short to battery
    3. CAN High Line short to ground
    4. CAN Low Line short to ground
    5. CAN High and Low line short to each other
    6. CAN High Line short to 5V power
    7. CAN High Line open
    8. CAN Low Line open
      CAUTION: Under Sleep condition, CAN High Line is 0V and CAN Low Line is battery voltage.
Enable Conditions
  • IPM, PSM power on

    (Under normal communication)
Threshold Value
  • CAN high: 0V or B+
  • CAN low: 0V or B+
Diagnostic Time
  • 2 sec
DTC Erasing Time
  • DTC is erased immediately after trouble fixed
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.