SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2011SANTA FE GLS, 3.5 G, AWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTILOCK BRAKE SYSTEM (ABS)/ELECTRONIC STABILITY CONTROL (ESC) DIAGNOSISDTC C1626: IMPLAUSIBLE CONTROLGENERAL INFORMATIONDTC DETECTING CONDITION
2011 Hyundai Santa Fe GLS, 3.5 G, AWD

General Information: DTC Detecting Condition

2011 Hyundai Santa Fe GLS, 3.5 G, AWDSECTION DTC Detecting Condition
DTC DETECTION CONDITION AND POSSIBLE CAUSES

Item Detecting Condition Possible Cause
DTC Strategy
  • Signal monitoring
  • Faulty HECU
Monitoring Period
  • Continuous
Enable Conditions
  • If the controller requests pressure-hold or pressure-decrease for longer than 1.28s, a fault is stored.
  • Under normal condition, the inlet valves of all four wheels are not closed during control for longer than 1.28s.
Fail-Safe
  • The ABS/ESC functions are inhibited, allow the EBD control.
  • The ABS/ESC warning lamps are activated.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.