Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2011SANTA FE GLS, 3.5 G, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE CONTROL SYSTEM - G3.5 DOHCVCM POSITION SENSORSPECIFICATION
2011 Hyundai Santa Fe GLS, 3.5 G, AWD
VCM Position Sensor: Specification
2011 Hyundai Santa Fe GLS, 3.5 G, AWDSECTION Specification
VARIABLE CHARGE MOTION POSITION SENSOR SPECIFICATIONS
| Item | Specification |
|---|---|
| Coil Resistance (Ω) | [20°C (68°F)] |
VARIABLE CHARGE MOTION POSITION SENSOR SPECIFICATIONS
| Valve Angle (°) | Output Voltage (V) | |
|---|---|---|
| Mechanical stop | 0 | 4.45 ~ 4.55 |
| Intake Close | 7 | 3.24 ~ 4.36 |
| Intake Open | 63 | 0.04 ~ 1.76 |
| Mechanical stop | 70 | 0.45 ~ 0.55 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.