Diagnostic Trouble Code Index

2011 Hyundai Equus SignatureSECTION Diagnostic Trouble Code Index
DIAGNOSTIC TROUBLE CODE DESCRIPTIONS

DTC Description
DTC C1101  Battery Voltage High
DTC C1102  Battery Voltage Low
DTC C1103  Ignition Signal Failure
DTC C1241  Force Sensor Failure
DTC C1242  Force Sensor Not Calibrated
DTC C1262  Temperature Sensor Failure
DTC C1270  Temperature/Overload
DTC C1501  Switch Failure
DTC C1604  ECU Hardware Error
DTC C1611  CAN Time-out ECM
DTC C1612  CAN Time-out TCM
DTC C1613  CAN signal error ECM (Check ECM)
DTC C1616  CAN Bus off
DTC C1625  CAN Time-out ABS/ESC(ESP)
DTC C1628  CAN Timeout - Cluster
DTC C1642  CAN signal error ESC(ESP)
DTC C1646  CAN signal error TCU
DTC C1656  CAN signal error Cluster
DTC C2202  Latching Failure/Mechanics
DTC C2402  Motor Electrical
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.