SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2011EQUUS SIGNATUREREPAIR AND DIAGNOSISBRAKESPARKING BRAKE SYSTEMELECTRIC PARKING BRAKE SYSTEM DIAGNOSISDTC C1241: FORCE SENSOR FAILUREGENERAL INFORMATIONDTC DETECTING CONDITION
2011 Hyundai Equus Signature

General Information: DTC Detecting Condition

2011 Hyundai Equus SignatureSECTION DTC Detecting Condition
DTC DETECTING CONDITION CHART

Item Detecting Condition Possible Cause
DTC Strategy
  • Signal monitoring.
  1. Open/short in the force sensor circuit.
  2. Faulty force sensor(inside of EPB ASS'Y).
  3. Faulty EPB ECU(inside of EPB ASS'Y).
Threshold value
  • When the supply voltage(5V) is out of the normal range.
  • When the output signal is below 0.1V or above 4.9V.
  • When the signal of the force sensor is abnormal.
Fail-Safe
  • The EPB functions are inhibited.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.