SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2011ELANTRA TOURING L4-2.0LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTEXHAUST SYSTEMEXHAUST PIPESERVICE AND REPAIR
2011 Hyundai Elantra Touring L4-2.0L

Exhaust Pipe: Service and Repair

2011 Hyundai Elantra Touring L4-2.0LSECTION Service and Repair




Removal

1. Disconnect the front oxygen sensor connector(B).
2. Remove the front muffler(A).

Tightening torque
39.8 - 58.8Nm (4.0 - 6.0kgf.m, 28.9 - 43.4lb-ft)




3. Remove the center muffler(A) and the main muffler(B).

Tightening torque
39.8 - 58.8Nm (4.0 - 6.0kgf.m, 28.9 - 43.4lb-ft)




RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.