Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2011AZERA V6-3.8LREPAIR AND DIAGNOSISBODY AND FRAMELOCKSPOWER LOCKSPOWER DOOR LOCK SWITCHTESTING AND INSPECTION
2011 Hyundai Azera V6-3.8L
Power Door Lock Switch: Testing and Inspection
2011 Hyundai Azera V6-3.8LSECTION Testing and Inspection
Inspection
1. Power door lock switch, a component of CAN, performs CAN communication with BCM, seat ECU, tilt ECU, passenger side power window switch and it also performs LIN communication with switch module and safety ECU. Driver controls driver side power window switch button located inside of the driver side door to operate power window, mirror, door lock and unlock.
2. Check BCM input/output value of each position of DDM or ADM when you inspect the module whether faulty or not.
3. If the operation of DDM or ADM is abnormal, replace DDM or ADM.
4. Select model and BCM menu.
5. Select "DDM" or "ADM".
6. Select "Current data".
7. Check OFF->ON when you operate door lock switch or door unlock switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.