Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHYUNDAI2009TUCSON LIMITED, 2.0 BREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLESC (ELECTRONIC STABILITY CONTROL) SYSTEMTROUBLESHOOTING FOR DTCC1613 CAN WRONG MESSAGEDTC DETECTING CONDITION

2009 Hyundai Tucson Limited, 2.0 B

C1613 CAN Wrong Message: DTC Detecting Condition

2009 Hyundai Tucson Limited, 2.0 BSECTION DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	CAN message monitoring	Faulty PCM (ECM) Faulty HECU
Enable Conditions	In case that the information about transmission is different in the EMS2 message and TCM message within normal voltage condition. The Monitoring starts 2000 ms after Power Up.
Fail Safe	Inhibit the ESC control and allow the ABS/EBD control. The ESC warning lamp is activated.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.