Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2009TUCSON LIMITED, 2.0 BREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEIGNITION SYSTEMENGINE ELECTRICAL SYSTEM - GENERAL INFORMATIONSPECIFICATIONSTARTING SYSTEM
2009 Hyundai Tucson Limited, 2.0 B
Starting System
2009 Hyundai Tucson Limited, 2.0 BSECTION Starting System
STARTING SYSTEM SPECIFICATIONS
| Item | Specifications | |||
|---|---|---|---|---|
| 2.7 | 2.0 | |||
| Starter | Type | Reduction drive (with planetary gear) | ||
| Rated voltage | 12V, 1.2KW | 12V, 1.2KW | ||
| No. of pinion teeth | 8 | 8 | ||
| No-load characteristics | Voltage | 11V | 11V | |
| Amperage | 90A, MAX | 90A, MAX | ||
| Speed | 2,800rpm, MIN | 3,000rpm, MIN | ||
| Commutator diameter | Standard | 29.4 mm (1.157 in.) | ||
| Limit | 28.4 mm (1.118 in.) | |||
| Undercut depth | Standard | 0.5 mm (0.02 in.) | ||
| Limit | 0.2 mm (0.008 in.) | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.