Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2009SONATA SE, 3.3 FREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSION SYSTEM - A5HF1INSPECTION CHART FOR DIAGNOSIS TROUBLE CODES (DTC)NOTES
2009 Hyundai Sonata SE, 3.3 F
Inspection Chart For Diagnosis Trouble Codes (DTC): Notes
2009 Hyundai Sonata SE, 3.3 FSECTION Notes
DIAGNOSIS TROUBLE CODES INSPECTION CHART
| No | Code | Item | Remark |
|---|---|---|---|
| 1 | P0707 | Transmission range sensor circuit low input | |
| 2 | P0708 | Transmission range sensor circuit high input | |
| 3 | P0711 | Transmission fluid temperature sensor" A" circuit range/performance | |
| 4 | P0712 | Transmission fluid temperature sensor" A" circuit low input | |
| 5 | P0713 | Transmission fluid temperature sensor" A" circuit high input | |
| 6 | P0717 | Input/turbine speed sensor" A" circuit no signal | |
| 8 | P0722 | Output speed sensor circuit no signal | |
| 9 | P0731 | Gear 1 incorrect ratio | |
| 10 | P0732 | Gear 2 incorrect ratio | |
| 11 | P0733 | Gear 3 incorrect ratio | |
| 12 | P0734 | Gear 4 incorrect ratio | |
| 13 | P0735 | Gear 5 incorrect ratio | |
| 14 | P0736 | Reverse incorrect ratio | |
| 15 | P0741 | Torque converter clutch circuit performance or stuck off | |
| 16 | P0742 | Torque converter clutch circuit stuck on | |
| 17 | P0743 | Torque converter clutch circuit electrical | |
| 18 | P0748 | Pressure control solenoid valve (VFS) " A" electrical | |
| 19 | P0750 | Shift control solenoid valve " A" (low & reverse brake solenoid) | |
| 20 | P0755 | Shift control solenoid valve " B " (under drive clutch solenoid) | |
| 21 | P0760 | Shift control solenoid valve " C " (2nd brake solenoid) | |
| 22 | P0765 | Shift control solenoid valve" D " (Over drive clutch solenoid) | |
| 23 | P0770 | Shift control solenoid valve" E " (reduction clutch solenoid) | |
| 24 | P0885 | TCM power relay control circuit/open | |
| 25 | P0890 | TCM power relay control circuit low | |
| 26 | P0891 | TCM power relay control circuit high |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.