Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2009AZERA V6-3.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSWHEEL STUD / LUG NUT
2009 Hyundai Azera V6-3.8L
Wheel Stud / Lug Nut
2009 Hyundai Azera V6-3.8LSECTION Wheel Stud / Lug Nut
Wheel Nut Tightening
Tightening torque 90 - 110 N.m (9 - 11 kgf.m, 65.1 - 79.5 lb-ft)
CAUTION:
When using an impact gun, final tightening torque should be checked using a torque wrench.
Tightening order
Check the torque again after tightening the wheel nuts diagonally.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.