Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2009AZERA V6-3.8LREPAIR AND DIAGNOSISBODY AND FRAMEDOORS, HOOD AND TRUNKHOODHOOD LATCHSERVICE AND REPAIR
2009 Hyundai Azera V6-3.8L
Hood Latch: Service and Repair
2009 Hyundai Azera V6-3.8LSECTION Service and Repair
Hood Latch Replacement
1. Remove the front bumper cover
2. Detach the clips, then remove the hood latch cover (A).
3. Remove the hood latch (A) mounting bolts.
4. Disconnect the hood latch cable (B) and release Cable (C).
5. Installation is the reverse of removal.
NOTE:
- Make sure the hood latch cable is connected properly.
- Make sure the hood locks securely.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.