Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2008ENTOURAGE V6-3.8LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSA/T - SPEED SENSOR IDENTIFICATION/APPLICATION
2008 Hyundai Entourage V6-3.8L
A/T - Speed Sensor Identification/Application
2008 Hyundai Entourage V6-3.8LSECTION A/T - Speed Sensor Identification/Application
Group AUTOMATIC TRANSMISSION
Number 09-AT-010
Date JUNE, 2009
Model 2007 - ENTOURAGE
Subject
CHANGE OF VEHICLE SPEED SENSOR
DESCRIPTION:
Two types of vehicle speed sensors (VSS) may be installed on the Entourage 45000-3A500 and 45000-3A501 transmissions.
If you receive a remanufactured transmission with the incorrect vehicle speed sensor, remove the vehicle speed sensor from the removed transmission and install on the replacement transmission.
NOTE:
The vehicle speed sensor is installed on top of the transmission.
PARTS INFORMATION
Number 09-AT-010
Date JUNE, 2009
Model 2007 - ENTOURAGE
Subject
CHANGE OF VEHICLE SPEED SENSOR
DESCRIPTION:
Two types of vehicle speed sensors (VSS) may be installed on the Entourage 45000-3A500 and 45000-3A501 transmissions.
If you receive a remanufactured transmission with the incorrect vehicle speed sensor, remove the vehicle speed sensor from the removed transmission and install on the replacement transmission.
NOTE:
The vehicle speed sensor is installed on top of the transmission.
PARTS INFORMATION
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.