Crankshaft, Engine

2005 Hyundai Tiburon L4-2.0LSECTION Crankshaft, Engine
Crankshaft
Pin O.D. 45 mm (1.77 inch)
Journal O.D. 57 mm (2.244 =inch)
Bend 0.03 mm (0.0012 = inch) or less
Out-of-round, taper of journal and pin 0.005 mm (0.0002 inch.) or less
Limit 0.030 mm (0.0012 =inch)
End play 0.06 - 0.260 mm (0.0023 - 0.010 =inch)
Undersize rework dimension of pin 0.25 mm (0.010 =inch) 44.725 - 44.740 mm (1.7608 - 1.7614 inch)
Undersize rework dimension of journal 0.25 mm (0.010 inch) 56.727 - 56.742 mm (2.2333 - 2.2339 inch)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.