SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLABS (ANTI-LOCK BRAKE SYSTEM)TROUBLESHOOTINGNOTES WITH REGARD TO DIAGNOSISNOTES
2005 Hyundai Santa Fe GLS, 2.7 D, AWD

Notes With Regard To Diagnosis: Notes

2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION Notes

The phenomena listed in the following table are not abnormal.

PHENOMENON EXPLANATION

Phenomenon Explanation
System check sound When starting the engine, a thudding sound can sometimes be heard coming from inside the engine compartment. This is because the system operation check is being performed.
ABS operation sound
  1. Sound of the motor inside the ABS hydraulic unit operation (whine).
  2. Sound is generated along with vibration of the brake pedal (scraping).
  3. When ABS operates, sound is generated from the vehicle chassis due to repeated brake application and release (Thump: suspension; squeak: tires)
ABS operation (Long braking distance) For road surfaces such as snow-covered and gravel roads, the braking distance for vehicles with ABS can sometimes be longer than that for other vehicles. Accordingly, advise the customer to drive safely on such roads by lowering the vehicle speed.
Pedal kick back Pedal kick back is normal operation.
Diagnosis detection conditions can vary depending on the diagnosis code. When checking the trouble symptom after the diagnosis code has been erased, ensure that the requirements listed in "Comment" are met.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.