Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEIGNITION SYSTEMENGINE ELECTRICAL SYSTEM - GENERAL INFORMATIONSPECIFICATIONSTARTING SYSTEM
2005 Hyundai Santa Fe GLS, 2.7 D, AWD
Starting System
2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION Starting System
STARTING SYSTEM SPECIFICATIONS CHART
| Item | Specifications | ||||
|---|---|---|---|---|---|
| 2.4 | 2.7 | 3.5 | |||
| Starter | Type | Reduction drive (with planetary gear) | |||
| Rated voltage | 12 V, 1.2 KW | ||||
| No. of pinion teeth | 8 | ||||
| No-load charasteristics | Voltage | 11 V | |||
| Amperage | 90 A, MAX | ||||
| Speed | 2,800 RPM, MIN | ||||
| Commutator diameter | Standard | 29.4 mm (1.157 in.) | |||
| Limit | 28.4 mm (1.118 in.) | ||||
| Undercut depth | Standard | 0.5 mm (0.02 in.) | |||
| Limit | 0.2 mm (0.008 in.) | ||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.