Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSFUEL SYSTEM (G6BA-GSL 2.7)GENERALSERVICE STANDARDS
2005 Hyundai Santa Fe GLS, 2.7 D, AWD
Service Standards
2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION Service Standards
SERVICE STANDARDS SPECIFICATIONS
| Item | Standard valve | ||
|---|---|---|---|
| Actual ignition timing | BTDC 12° +/- 5° at curb idle | ||
| Curb idle speed (RPM) | P or N - Range | A/C OFF | 700 +/- 100 |
| A/C ON | 880+/- 100 | ||
| D - Range | A/C OFF | 670 +/- 100 | |
| A/C ON | 670 +/- 100 | ||
| Fuel pressure kPa (psi) | Vacuum hose disconnection | 330 ~ 350 (47-50) at curb idle | |
| Vacuum hose connection | Approx. 270 (38) at curb idle | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.