Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALTIMING BELTENGINE (G6BA-GSL 2.7L)INTAKE AND EXHAUST SYSTEMAIR CLEANER (ACL)REMOVAL
2005 Hyundai Santa Fe GLS, 2.7 D, AWD
Air Cleaner (ACL): Removal
2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION Removal
- Disconnect the air flow sensor connector.
- Remove the air intake hose and air duct connected to the air cleaner.
- Remove the three bolts attaching the air cleaner mounting brackets.
- Detach the air cleaner.
- Remove the air flow sensor from the air intake hose.CAUTION: Do not pull on the air flow sensor wires.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.