Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2005SANTA FE GLS, 2.7 D, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)DRIVELINES & AXLESDIFFERENTIALS & DRIVE AXLESGENERAL - DIFFERENTIAL & DRIVE AXLESSPECIFICATIONSPROPELLER SHAFT
2005 Hyundai Santa Fe GLS, 2.7 D, AWD
Propeller Shaft
2005 Hyundai Santa Fe GLS, 2.7 D, AWDSECTION Propeller Shaft
PROPELLER SHAFT SPECIFICATIONS
| ITEMS | SPECIFICATION | ||
|---|---|---|---|
| Engine type | 2.4L/2.7L | 3.5L | |
| Length x Outer diameter | mm (in) | 2016.5 x 76.2 (79.6 x 3) | 1887 x 76.2 (74.3 x 3) |
| Front | mm (in) | 959.4 x 76.2 (38 x 3) | 960 x 76.2 (37.8 x 3) |
| Rear | mm (in) | 1057.1 x 76.2 (41.5 x 3) | 927 x 76.2 (36.5 x 3) |
| Clearance between snap ring and groove | |||
| Wall of yoke | 0.02 ~ 0.06 mm (0.0008 ~ 0.0024 in) | ||
| Runout | 0.5 mm (0.020 in) or less | ||
NOTE:
Propeller shaft length indicates the length between the center points of each joint.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.