Guide And Slider Replacement Install

2005 Hyundai Elantra GLS, 4D Hatchback, AutomaticSECTION Guide And Slider Replacement Install
  1. Turning a front guide assembly (A) part outward a little, insert it to rail (B).
    Fig 1: Turning Front Guide Assembly
    G03843890Courtesy of HYUNDAI MOTOR CO.
  2. Connect the slide (B) to the drive cable.
  3. Inserting the roller (D) of a guide assembly (A) in sliding area, install a guide assembly.
    Fig 2: Inserting Roller Of Guide Assembly
    G03843891Courtesy of HYUNDAI MOTOR CO.
  4. Install a guide assembly (A) pushing it to the end of rail and let the roller (D) of a guide assembly located in the middle of sliding area.
    Fig 3: Installing Guide Assembly
    G03843892Courtesy of HYUNDAI MOTOR CO.
  5. Inserting the shutting (A) into the sunroof rail (B), install the screws.
    Fig 4: Inserting Shutting Into Sunroof Rail
    G03843893Courtesy of HYUNDAI MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.