Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Belt Adjustment
2003 Hyundai XG350 LSECTION Belt Adjustment
BELT ADJUSTMENT
| Application | (1) Drive Belt Deflection - In. (mm) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Accent | |||||||||
| A/C | |||||||||
| New Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| Used Belt | 0.24-0.28 (6.0-7.0) | ||||||||
| Generator | |||||||||
| New Belt | 0.29-0.35 (7.5-9.0) | ||||||||
| Used Belt | 0.39 (10) | ||||||||
| P/S | |||||||||
| New Belt | (2) | ||||||||
| Used Belt | 0.28-.039 (7.0-10.0) | ||||||||
| Elantra | |||||||||
| A/C | |||||||||
| New Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| Used Belt | 0.24-0.28 (6.0-7.0) | ||||||||
| Generator | |||||||||
| New Belt | 0.16-0.17 (4.0-4.4) | ||||||||
| Used Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| P/S | |||||||||
| New Belt | (2) | ||||||||
| Used Belt | 0.24-.035 (6.0-9.0) | ||||||||
| Santa Fe (2.4L) | |||||||||
| A/C | |||||||||
| New Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| Used Belt | 0.24-0.28 (6.0-7.0) | ||||||||
| Generator | |||||||||
| New Belt | 0.30-0.35 (7.5-9.0) | ||||||||
| Used Belt | 0.40 (10.0) | ||||||||
| P/S | |||||||||
| New Belt | (2) | ||||||||
| Used Belt | 0.24-0.35 (6.0-9.0) | ||||||||
| Santa Fe (2.7L) | (3) | ||||||||
| Santa Fe (3.5L) | (2) | ||||||||
| Sonata (2.4L) | |||||||||
| A/C | |||||||||
| New Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| Used Belt | 0.24-0.28 (6.0-7.0) | ||||||||
| Generator | |||||||||
| New Belt | 0.30-0.35 (7.5-9.0) | ||||||||
| Used Belt | 0.40 (10.0) | ||||||||
| P/S | |||||||||
| New Belt | (2) | ||||||||
| Used Belt | 0.24-0.35 (6.0-9.0) | ||||||||
| Sonata (2.7L) | (3) | ||||||||
| Tiburon (2.0L) | |||||||||
| A/C | |||||||||
| New Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| Used Belt | 0.24-0.28 (6.0-7.0) | ||||||||
| Generator | |||||||||
| New Belt | 0.16-0.17 (4.0-4.4) | ||||||||
| Used Belt | 0.20-0.22 (5.0-5.5) | ||||||||
| P/S | |||||||||
| New Belt | 0.346-0.433 (8.8-11.0) | ||||||||
| Used Belt | 0.492-0.563 (12.5-14.3) | ||||||||
| Tiburon (2.7L) | (3) | ||||||||
| XG350 | |||||||||
| New Belt | (2) | ||||||||
| Used Belt | (2) | ||||||||
|
|||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.