Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003XG350 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALSTARTERSON-VEHICLE TESTINGPARK/NEUTRAL POSITION SWITCH
2003 Hyundai XG350 Base
Park/Neutral Position Switch
2003 Hyundai XG350 BaseSECTION Park/Neutral Position Switch
- Disconnect transaxle range switch harness connector located on top of transaxle. Ensure continuity exists between switch terminals No. 9 and 10 when shift selector lever is in Park and Neutral. See Fig 1 .
- If continuity does not exist, ensure transaxle range switch is adjusted properly. See PARK/NEUTRAL POSITION SWITCH under ADJUSTMENTS. If switch adjustment is okay, replace transaxle range switch switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.