Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003XG350 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALSTARTERSSTARTER SPECIFICATIONS
2003 Hyundai XG350 Base
Starter Specifications
2003 Hyundai XG350 BaseSECTION Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Amperage | 90 | |||
| Armature Maximum Runout | ||||
| Standard | 0.002 In. (0.05 mm) | |||
| Limit | 0.0039 In. (0.1 mm) | |||
| Brush Length | (1) | |||
| Commutator Outside Diameter | ||||
| Standard Diameter | 1.157 In. (29.4 mm) | |||
| Wear Limit | 1.118 In. (28.4 mm) | |||
| Insulator Depth | ||||
| Standard Depth | 0.020 In. (0.5 mm) | |||
| Wear Limit | 0.079 In. (0.2 mm) | |||
| No. Of Pinion Teeth | 8 | |||
| Pinion Gap | 0.02-0.079 In. (0.5-2.0 mm) | |||
| Speed | 2800 RPM | |||
| Terminal Voltage | 12 Volt | |||
| Type | Reduction Drive (With Planetary Gear) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.