Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003XG350 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALSTARTERSADJUSTMENTSSHIFT LOCK AND KEY LOCK CABLE
2003 Hyundai XG350 Base
Shift Lock And Key Lock Cable
2003 Hyundai XG350 BaseSECTION Shift Lock And Key Lock Cable
- Check that each lock cam is as shown. See Fig 1 .
- Install the shift lock and key lock cable in position. In this case, the shift lock cable must be fixed to the brake pedal and the key lock cable must be fixed to the key cylinder.
- Temporarily install each cable to the A/T lever assembly as shown. See Fig 1 . Securely insert the cable end into the fixing pin of each cam.
- Slightly pull the shift lock cable in the direction "E".
- After checking that the portion of the cable end touches the cable fixing pin, fix with the self-tapping bolt.
- Slightly push the key lock cam to direction "Q".
- Slightly pull the key lock cable in the direction "G" to stretch the cable. Then fix the cable with the self-tapping bolt.
- Check that the key lock and the shift lock cable are secure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.