SYS.OK|MANUAL.DB● LIVE
2003 Hyundai Santa Fe LX, 2.7 D, AWD

Quick Lookups: Fluids

2003 Hyundai Santa Fe LX, 2.7 D, AWDSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Refrigerant 1.35 LBS. 0.61 KG R-134a S
Automatic Transmission Fluid 8.90 QTS. 8.42 L HYUNDAI Automatic Transmission Fluid DIAMOND SP III or SK Automatic Transmission Fluid SP III S
Brake Fluid N/A N/A DOT 3 Brake Fluid As required. S
Clutch Fluid N/A N/A DOT 3 Brake Fluid As required. S
Differential Gear Oil Rear 1.16 QTS. 1.09 L API - GL-5, SAE 80W-90 (SHELL SPIRAX AX) S
Engine Coolant 2.7L Eng 7.40 QTS. 7 L 50/50 mixture of Ethylene Glycol Antifreeze and water The engine coolant should be compatible with aluminum engine parts. S
Engine Oil 2.7L Eng Drain and Refill,w/Filter 4.76 QTS. 4.5 L API - SH, SG or SG/CD Normal Climate: SAE 10W-30 10W-40, 10W-50 (Above -10Deg.F or -23oC) Hot Climate: SAE 20W-40, 20W-50 (Above 32Deg.F or 0oC) Cold Climate: SAE 5W-30, 5W-40 (Below 100Deg.F or 38oC) S
Engine Oil 2.7L Eng Drain and Refill,w/o Filter 4.44 QTS. 4.2 L API - SH, SG or SG/CD Normal Climate: SAE 10W-30 10W-40, 10W-50 (Above -10Deg.F or -23oC) Hot Climate: SAE 20W-40, 20W-50 (Above 32Deg.F or 0oC) Cold Climate: SAE 5W-30, 5W-40 (Below 100Deg.F or 38oC) S
Fuel Tank 19.00 GALS. 71.92 L S
Manual Transmission Fluid 2.43 QTS. 2.29 L API - GL-4, SAE 75W-90 S
Power Steering Fluid 2.7L Eng 0.95 QTS. 0.89 L Power Steering Fluid Type 3 Fluid S
Transfer Case Fluid 0.84 QTS. 0.79 L API - GL-5, SAE 80W-90 S
Windshield Washer Fluid N/A N/A Use a good quality windshield washer fluid, diluted with water as necessary. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.