SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003SANTA FE BASE, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 8 (COMPUTER RELEARN PROCEDURES - IMPORT)MERCEDES-BENZEASY ENTRY/EXIT FUNCTION
2003 Hyundai Santa Fe Base, Automatic

Easy Entry/Exit Function

2003 Hyundai Santa Fe Base, AutomaticSECTION Easy Entry/Exit Function
WARNING: This page does not describe the selected car, but rather 164 other vehicles, including the 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, 2002 Volvo S60, and 2002 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Synchronization procedure can also be performed with STAR DIAGNOSIS tester. Easy entry/exit function is activated through multifunction display in instrument cluster.

To allow easier entry or exit from vehicle. Driver's seat and steering column are moved to easy entry/exit position. Seat and steering column are move to full-back and full-up positions. To recalibrate easy entry/exit function:

  • Using power seat switch, raise head restraint to full-up position. Maintain switch pressure for one second after full-up position is reached.
  • Move seat bottom to full forward position. Maintain switch pressure for one second after full forward position is reached.
Easy entry/exit function is now calibrated, and if activated will move seat to full-back and steering column to full-up positions when transmission is place in Park or Neutral position and door is opened.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.