Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003ACCENT BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALSTARTERSSTARTER SPECIFICATIONS
2003 Hyundai Accent Base
Starter Specifications
2003 Hyundai Accent BaseSECTION Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | |||
|---|---|---|---|---|
| Amperage | 60 Amps | |||
| Armature Maximum Runout | 0.004" (0.10 mm) | |||
| Brush Length | (1) | |||
| Commutator Outside Diameter | 1.118-1.157" (28.4-29.4 mm) | |||
| Insulator Depth | 0.008-0.020" (0.2-0.5 mm) | |||
| Maximum Speed | 5500 RPM | |||
| No-Load Ratings | ||||
| Maximum Draw | 90 Amps | |||
| Minimum RPM | 2800 | |||
| Number Of Pinion Teeth | 8 | |||
| Pinion Gap | 0.020-0.079" (0.5-2.0 mm) | |||
| Rated Output | 12 Volts (0.9 kW) | |||
| Rated Time | 30 Seconds | |||
| Terminal Voltage | 11.5 Volts | |||
| Type | Direct Drive | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.