Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Ignition Timing
Ignition timing is computer controlled and is not adjustable. Standard reference timing data for various engine operating conditions is stored in Engine Control Module (ECM) memory. ECM controls ignition timing based on engine operating conditions (speed, load, temperature, etc.) and data stored in ECM memory. ECM controls timing through ignition coil operation. When inspecting ignition timing, ensure is as specified. See IGNITION TIMING SPECIFICATIONS table.
| Application | (1) Base Timing (Degrees BTDC @ RPM) | |||
|---|---|---|---|---|
| Accent | 4°-14° @ 800 RPM | |||
| Elantra | 3°-13° @ 700 RPM | |||
| Santa Fe | ||||
| 2.4L | 2°-12° @ 800 RPM | |||
| 2.7L | 7°-17° @ 700 RPM | |||
| Sonata | ||||
| 2.4L | 2°-12° @ 700 RPM | |||
| 2.7L | 7°-17° @ 700 RPM | |||
| XG350 | 3°-7° @ 700 RPM | |||
|
||||
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.