Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002XG 350 V6-3.5LREPAIR AND DIAGNOSISBODY AND FRAMESEATSMEMORY POSITIONING SYSTEMSTESTING AND INSPECTIONIMS FUNCTION
2002 Hyundai XG 350 V6-3.5L
IMS Function
2002 Hyundai XG 350 V6-3.5LSECTION IMS Function
IMS FUNCTION
1. Memory function
- Prohibition condition of memory
1. After 5 sec when memory switch ON
2. Seat manual switch ON
3. Ignition switch OFF
4. Stop switch ON
5. Memory finished
2. Regeneration function
- Prohibition condition of regeneration
1. Ignition switch OFF
2. Parking brake switch OFF and shift lever positioned except "P" position (A/T)
3. Parking brake switch OFF (M/T)
4. Vehicle speed is over 3 km/h
5. Stop switch ON
6. During the manual switch operation
3. ON/OFF interlock function (Seat) Prohibition condition of interlock
1. Auto switch OFF
2. Parking brake is released (Switch OFF)
3. Stop switch ON
4. During the manual switch operation
4. Memory or regeneration by transmitter
- Prohibition condition memory or regeneration by transmitter
1. Parking brake is released (Switch OFF)
2. During the manual switch operation
1. Memory function
- Prohibition condition of memory
1. After 5 sec when memory switch ON
2. Seat manual switch ON
3. Ignition switch OFF
4. Stop switch ON
5. Memory finished
2. Regeneration function
- Prohibition condition of regeneration
1. Ignition switch OFF
2. Parking brake switch OFF and shift lever positioned except "P" position (A/T)
3. Parking brake switch OFF (M/T)
4. Vehicle speed is over 3 km/h
5. Stop switch ON
6. During the manual switch operation
3. ON/OFF interlock function (Seat) Prohibition condition of interlock
1. Auto switch OFF
2. Parking brake is released (Switch OFF)
3. Stop switch ON
4. During the manual switch operation
4. Memory or regeneration by transmitter
- Prohibition condition memory or regeneration by transmitter
1. Parking brake is released (Switch OFF)
2. During the manual switch operation
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.