Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002ACCENT GL, AUTOMATICREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSGENERATORS & REGULATORSBENCH TESTINGBRUSHES
2002 Hyundai Accent GL, Automatic
Bench Testing: Brushes
2002 Hyundai Accent GL, AutomaticSECTION Brushes
- Replace brushes if worn to limit line. See Fig 1 . Replace all brush springs if any springs are damaged or corroded.
- To remove brushes from holder, unsolder pigtail from terminal. See Fig 2 . To replace, install brush and spring so that space between limit line and brush holder end is 0.079-0.118" (2.0-3.0 mm), and solder pigtail to brush holder.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.