Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002ACCENT GL, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE MECHANICAL SYSTEM (DOHC 1.6L)COOLING SYSTEMENGINE COOLANT PUMPREASSEMBLY
2002 Hyundai Accent GL, Automatic
Engine Coolant Pump: Reassembly
2002 Hyundai Accent GL, AutomaticSECTION Reassembly
- Clean the gasket surfaces of the coolant pump body and the cylinder block.
- Install a new coolant pump gasket to the coolant pump and tighten the bolts to the specified torque.
Tightening torque
Coolant pump to cylinder block:
A: 12-15Nm (120-150kg.cm, 9-11lb.ft)
B: 20-27Nm (200-270kg.cm, 15-20 lb.ft)
- Install the timing tensioner and timing belt. Adjust the timing belt tension.
- Install the timing belt covers.
- Install the coolant pump pulley and drive belt, and then adjust the belt tension.
- Refill the system with clean coolant.
- Run the engine and check for leaks.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.