Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1999ELANTRA WAGON L4-2.0LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSSECURITY SYSTEM - PROGRAMMINGOVERVIEW
1999 Hyundai Elantra Wagon L4-2.0L
Security System - Programming: Overview
1999 Hyundai Elantra Wagon L4-2.0LSECTION Overview
Group: BODY ELECTRICAL
Number: 01-90-011
Date: SEPTEMBER, 2001
Model: ALL
Subject:
PROGRAMMING HYUNDAI SECURITY SYSTEM
DESCRIPTION:
This bulletin provides programming procedures for all security Systems available on Hyundai vehicles. There are three different types of security systems available: Clifford Supplied System1 Directed Electronics, Inc. (DEI) Supplied System and Factory Installed System. The chart shows which system is available for each model year Hyundai.
NOTES:
^ The three security system kits/parts are not interchangeable.
^ Refer to TSB 01-90-003 for Hyundai Security System Part Numbers.
^ Refer to pages 12-14 for security system transmitter, Valet Switch and LED illustrations.
Number: 01-90-011
Date: SEPTEMBER, 2001
Model: ALL
Subject:
PROGRAMMING HYUNDAI SECURITY SYSTEM
DESCRIPTION:
This bulletin provides programming procedures for all security Systems available on Hyundai vehicles. There are three different types of security systems available: Clifford Supplied System1 Directed Electronics, Inc. (DEI) Supplied System and Factory Installed System. The chart shows which system is available for each model year Hyundai.
NOTES:
^ The three security system kits/parts are not interchangeable.
^ Refer to TSB 01-90-003 for Hyundai Security System Part Numbers.
^ Refer to pages 12-14 for security system transmitter, Valet Switch and LED illustrations.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.