SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1999ELANTRA WAGON L4-2.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BLOCK SPECIFICATIONS
1999 Hyundai Elantra Wagon L4-2.0L

Cylinder Block Specifications

1999 Hyundai Elantra Wagon L4-2.0LSECTION Cylinder Block Specifications
SERVICE SPECIFICATIONS
Cylinder Block Warpage (Cylinder Head Face):
Standard 0.05 mm (0.0020 inch) Or Less
Limit 0.1 mm (0.0039 inch)
Cylinder Bore:
Inside Diameter 75.5 mm (2.972 inch)
Inside Diameter Taper 0.02 mm (0.0008 inch) Or Less
Piston To:
Cylinder Wall Clearance 0.025 - 0.045 mm (0.0008 - 0.0016 inch)

TORQUE SPECIFICATIONS





Part 1 of 4





Part 2 of 4





Part 3 of 4





Part 4 of 4
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.