Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1999ELANTRA WAGON L4-2.0LREPAIR AND DIAGNOSISRESTRAINTS AND SAFETY SYSTEMSRELAYS AND MODULES - RESTRAINTS AND SAFETY SYSTEMSAIR BAG CONTROL MODULESERVICE AND REPAIR
1999 Hyundai Elantra Wagon L4-2.0L
Air Bag Control Module: Service and Repair
1999 Hyundai Elantra Wagon L4-2.0LSECTION Service and Repair
SRS Control Module (SRSCM)
1. Disconnect battery ground cable.
1. Remove center console box trim.
2. Remove center console side covers.
3. Disconnect air bag control module harness first before removing mounting bolts.
4. Remove mounting bolts and control module.
5. Reverse procedure to install. Install control module with arrow facing front of vehicle.
1. Disconnect battery ground cable.
1. Remove center console box trim.
2. Remove center console side covers.
3. Disconnect air bag control module harness first before removing mounting bolts.
4. Remove mounting bolts and control module.
5. Reverse procedure to install. Install control module with arrow facing front of vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.