Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1999ELANTRA WAGON L4-2.0LREPAIR AND DIAGNOSISENGINE, COOLING AND EXHAUSTENGINECYLINDER BLOCK ASSEMBLYSPECIFICATIONSCYLINDER BLOCK SPECIFICATIONS
1999 Hyundai Elantra Wagon L4-2.0L
Cylinder Block Specifications
1999 Hyundai Elantra Wagon L4-2.0LSECTION Cylinder Block Specifications
SERVICE SPECIFICATIONS
Cylinder Block Warpage (Cylinder Head Face):
Standard 0.05 mm (0.0020 inch) Or Less
Limit 0.1 mm (0.0039 inch)
Cylinder Bore:
Inside Diameter 75.5 mm (2.972 inch)
Inside Diameter Taper 0.02 mm (0.0008 inch) Or Less
Piston To:
Cylinder Wall Clearance 0.025 - 0.045 mm (0.0008 - 0.0016 inch)
TORQUE SPECIFICATIONS
Part 1 of 4
Part 2 of 4
Part 3 of 4
Part 4 of 4
Cylinder Block Warpage (Cylinder Head Face):
Standard 0.05 mm (0.0020 inch) Or Less
Limit 0.1 mm (0.0039 inch)
Cylinder Bore:
Inside Diameter 75.5 mm (2.972 inch)
Inside Diameter Taper 0.02 mm (0.0008 inch) Or Less
Piston To:
Cylinder Wall Clearance 0.025 - 0.045 mm (0.0008 - 0.0016 inch)
TORQUE SPECIFICATIONS
Part 1 of 4
Part 2 of 4
Part 3 of 4
Part 4 of 4
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.