Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Service Specifications
1998 Hyundai Tiburon Base, AutomaticSECTION Service Specifications
SERVICE SPECIFICATIONS CHART
| Item | Standard | |
|---|---|---|
| A4AF2 | A4BF1 | |
| Input shaft end play Transfer shaft end play (Without pre-load) Oil pump gear side clearance Front clutch snap ring clearance Rear clutch snap ring clearance End clutch snap ring clearance |
0.3-1.0 mm (0.012-0.039 in.) 0.01-0.06 mm (0.0004-0.0024 in.) 0.02-0.048 mm (0.0008-0.0019 in.) 0.4-0.6 mm (0.016-0.024 in.) 0.3-0.5 mm (0.012-0.020 in.) 0.4-0.65 mm (0.016-0.026 in.) |
← ← ← 0.7-0.9 (0.028-0.035 in.) 0.4-0.6 (0.016-0.024 in.) 0.6-0.85 (0.024-0.034 in.) 2.0L |
| 0.4-0.65 (0.016-0.026 in.) 1.6, 1.8L | ||
| Low reverse brake end play Differential case end play Differential side gear and pinion backlash Transfer drive gear end play |
0.675-0.987 mm (0.026-0.039 in.) 0-0.15 mm (0-0.006 in.) 0.025-0.150 mm (0.0010-0.0059 in.) 0-0.06 mm (0-0.0024 in.) |
0.975-1.287 (0.038-0.051 in.) ← ← ← |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.