Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON BASE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCRUISE CONTROL SYSTEMSTROUBLE SHOOTINGSYSTEM CANCELS WHEN NOT WANTED OR CANNOT BE RESET AFTER AN AUTOMATIC CANCELLATION
1998 Hyundai Tiburon Base, Automatic
System Cancels When Not Wanted Or Cannot Be Reset After An Automatic Cancellation
1998 Hyundai Tiburon Base, AutomaticSECTION System Cancels When Not Wanted Or Cannot Be Reset After An Automatic Cancellation
- If engine or cruise control system main switch was turned off after problem occurred, go to next step. If engine and cruise control system main switch were not turned off, check for trouble codes (ensure engine is running and system main switch is on). See RETRIEVING CODES under SELF-DIAGNOSTIC SYSTEM .
- Try to reset system. If system cannot be reset, check for trouble codes. See RETRIEVING CODES under SELF-DIAGNOSTIC SYSTEM . If system can be reset, try to duplicate symptom during test drive. If symptom reoccurs, check for trouble codes. See RETRIEVING CODES under SELF-DIAGNOSTIC SYSTEM . If symptom does not re-occur, check for poor harness connections and/or damaged wiring harness.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.