Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1996ELANTRA L4-1.8LREPAIR AND DIAGNOSISSTEERING AND SUSPENSIONALIGNMENTSPECIFICATIONSFRONT WHEEL ALIGNMENT SPECIFICATIONS
1996 Hyundai Elantra L4-1.8L
Front Wheel Alignment Specifications
1996 Hyundai Elantra L4-1.8LSECTION Front Wheel Alignment Specifications
Caster Angle, Deg.:
Limits +1 1/6 to +2 5/6
Desired +2 1/3
Camber Angle, Deg.:
Limits -1/2 to +1/2
Desired 0
Toe, Inch [01] -0.12 to +0.12
King Pin Inclination, Deg. 12 11/60 to 12 31/60
Steering Angle, Deg.:
Inner Wheel 38 1/2 to 40 1/2
Outer Wheel 33
Ball Joint Inspection [04]
[01] -- Toe-in (+); toe-out (-).
[04] -- Refer to Front Suspension & Steering; for ball joint inspection procedure.
Limits +1 1/6 to +2 5/6
Desired +2 1/3
Camber Angle, Deg.:
Limits -1/2 to +1/2
Desired 0
Toe, Inch [01] -0.12 to +0.12
King Pin Inclination, Deg. 12 11/60 to 12 31/60
Steering Angle, Deg.:
Inner Wheel 38 1/2 to 40 1/2
Outer Wheel 33
Ball Joint Inspection [04]
[01] -- Toe-in (+); toe-out (-).
[04] -- Refer to Front Suspension & Steering; for ball joint inspection procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.