Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1994EXCEL GL, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL1.5L 4-CYL - VIN [J]ENGINE SPECIFICATIONSVALVES & VALVE SPRINGS SPECIFICATIONS
1994 Hyundai Excel GL, Standard
Valves & Valve Springs Specifications
1994 Hyundai Excel GL, StandardSECTION Valves & Valve Springs Specifications
VALVES & VALVE SPRINGS
| Application | Specification | |
|---|---|---|
| Intake Valves | ||
| Face Angle | 45° | |
| Minimum Margin | .028" (.70 mm) | |
| Stem Diameter | .260" (6.60 mm) | |
| Exhaust Valves | ||
| Face Angle | 45° | |
| Minimum Margin | .039" (1.00 mm) | |
| Stem Diameter | .260" (6.60 mm) | |
| Valve Springs | ||
| Free Length | 1.756" (44.60 mm) | |
| Installed Height | 1.417" (36.00 mm) | |
| Out-Of-Square (Max) | 3° | |
| Lbs. @ In. (kg @ mm) | ||
| Pressure | ||
| Valve Closed | 53 @ 1.075 (24 @ 27.30) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.