Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle - Diagnostic System Technical Support
1991 Hyundai Sonata V6-3.0LSECTION Vehicle - Diagnostic System Technical Support
Group: GENERAL
Number: 96-00-006
Date: JULY, 1996
Model: ALL
Subject
HYUNDAI DIAGNOSTIC SYSTEM
TECHNICAL SUPPORT
DESCRIPTION:
In the event that technical support is required for the Hyundai Diagnostic System (HDS), please refer to the table for the type of "Support Needed" and the "Who To Call" number associated with that information.
1) When phoning Edge, your call will either be answered by a support representative or it will go into voice mail. Normal call back time is within 2 hours. Please have your dealer code ready and, if possible, be near your HDS to perform testing as requested by the support personnel.
2) When phoning Triad, the call will be answered by a representative, who will take information, such as, dealer name, type of condition, contact phone number, etc. and will have someone call back. Triad's policy is to call back within 2 hours, however, if no one is available when the call back is made, it will be necessary to call the 800 number again.
Number: 96-00-006
Date: JULY, 1996
Model: ALL
Subject
HYUNDAI DIAGNOSTIC SYSTEM
TECHNICAL SUPPORT
DESCRIPTION:
In the event that technical support is required for the Hyundai Diagnostic System (HDS), please refer to the table for the type of "Support Needed" and the "Who To Call" number associated with that information.
1) When phoning Edge, your call will either be answered by a support representative or it will go into voice mail. Normal call back time is within 2 hours. Please have your dealer code ready and, if possible, be near your HDS to perform testing as requested by the support personnel.
2) When phoning Triad, the call will be answered by a representative, who will take information, such as, dealer name, type of condition, contact phone number, etc. and will have someone call back. Triad's policy is to call back within 2 hours, however, if no one is available when the call back is made, it will be necessary to call the 800 number again.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.