SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1990EXCEL BASE, 2D HATCHBACK, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICAL1.5L 4-CYL - VIN [J]ENGINE SPECIFICATIONSVALVES & VALVE SPRINGS SPECIFICATIONS
1990 Hyundai Excel Base, 2D Hatchback, Standard

Valves & Valve Springs Specifications

1990 Hyundai Excel Base, 2D Hatchback, StandardSECTION Valves & Valve Springs Specifications
VALVES & VALVE SPRINGS SPECIFICATIONS

Application Specification
Intake Valves
Face Angle 45°
Minimum Margin (1) .039" (.99 mm)
Stem Diameter .260" (6.60 mm)
Exhaust Valves
Face Angle 45°
Minimum Margin (2) .028" (.71 mm)
Stem Diameter .260" (6.60 mm)
Valve Springs
Free Length 1.756" (44.60 mm)
Installed Height 1.417" (35.99 mm)
Out-of-Square (3) 1.5°
Pressure: Lbs. @ In. (kg @ mm)
Valve Closed 53 @ 1.075 (24 @ 27.30)
(1) Wear limit is .020" (.51 mm).
(2) Wear limit is .039" (.99 mm).
(3) Wear limit is 3°.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.