Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1990EXCEL BASE, 2D HATCHBACK, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSOVERHAUL - KM175, KM176 & KM177COMPONENT DISASSEMBLY & REASSEMBLYFRONT CLUTCHDISASSEMBLY
1990 Hyundai Excel Base, 2D Hatchback, Automatic
Front Clutch: Disassembly
1990 Hyundai Excel Base, 2D Hatchback, AutomaticSECTION Disassembly
- Remove large snap ring, clutch plates and clutch discs from front clutch retainer. See Figure . Note direction and number of clutch plates and clutch discs installation for reassembly reference, as different models may use different number of components.
- Using spring compressor, compress return spring. Remove small snap ring from front clutch retainer. Remove spring compressor. Remove return spring and retainer.
- Remove front clutch piston from front clutch retainer. Remove "D" rings from clutch piston and front clutch retainer.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.