Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Keyless/Power Door Locks/Security System Tripped Sensor Recall
The security system stores information on the last tripped sensor if the security system has been actuated. The information can be retrieved using the HDS.
To retrieve the last tripped sensor data, do this:
1. Select HISTORY DATA from the SECURITY MODE MENU.
2. Scroll through the data list.
- Sensors that were actuated will indicate DETECT.
- Sensors that were not actuated will indicate NONE.
3. Inspect the DETECT circuit for:
- Misadjusted or damaged switch.
- Loose or corroded connections.
- Intermittent short to ground.
NOTE: If PANIC FRAME RECEPTION is indicated ON, inform the client that it could have been set by something pressing the panic button of one of the registered remotes (in a pocket or purse, under a stack of papers, etc.).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.